10-Diode Oval Strobe & Rear Turn Signal w/ Sync; amber, roadside low; poly bag
10 LED Strobe & Rear Turn Signal Oval, Roadside 6.5"X2.25" Multi-volt, amber, poly bag
- Two- or four-lamp system functions as both alternating strobes and DOT-compliant rear turn signals.
- Activating turn signal automatically overrides strobe function.
- Sync wire technology allows 2 lamps to communicate with each other without an external strobe controller.
- Does not require an external strobe controller. (Requires standard vehicle flasher for turn function.)
- Multi-volt design compatible with 12V and 24V systems.
- 30 degree angle, 3-wire, silicone-sealed twin AMP receptacles integrated into housing.
- Meets SAE J595 Class 2 specifications rotated in any orientation.
- Requires both 3-wire AMP-compatible plug and single wire sync plug for installation.
There are currently no resources for this product.
Bulb Technology
LED
Lens Color
amber
Flash Type
Quad
Syncronizable
Y
Mounting Type
grommet
Width
1.45
California Proposition 65
WARNING: Cancer and/or reproductive harm - www.P65Warnings.ca.gov
termination
AMP
Height
2.31
Bulb/Diode Count
10
Programmable
N
Integral Reflex
N
Average Current Draw
0.26
Multi-Volt
Y
Length
6.5
California Prop65 Required
Y
California Proposition 65 Required
Y
Family
LumenX
Voltage
12V / 24V
Light Color
amber
Shape
oval
Maximum Voltage
32
Minimum Voltage
9
SAE Class
J595 Class 2
Container Type
poly bag
Synchronizable
Y