5 MINUTE GAP FILLING EPOXY .84 FL. OZ.

PART PMX84101

SUPPLIER Permatex

SUPPLIER PART # 84101

Calculating price...

QUANTITY

About this item

5 Minute Epoxy Gel

Resistant to water and solvents. Temperature range -60°F to 180°F (-51°C to 82°C). Permanent strength up to 3400 PSI. Self-mixing dual syringe (84164) blends the adhesive and filler as it dispenses, eliminating the need for manual mixing., Clear appearance. Fills gaps and will not shrink., Versatile, easy-to-use, general purpose epoxy adhesive is two-part adhesive and filler system that eliminates the need for welding or brazing. Sets in five minutes, no clamping needed.

13215_PMX_84101_NUL_1

13215_PMX_84101_NUL_1.pdf

13215_PMX_84101_01

13215_PMX_84101_01.pdf

13215_PMX_84101

13215_PMX_84101.pdf

Curing Time 24.0

Mixing Required Yes

Resistant To Impact

Working Time 5.0

Compatible Surfaces Ceramic, Chrome, fabric, fiberglass, glass, hard plastic, metal and rubber

Dry Color Clear to slightly yellow

Dispenser Type Syringe dispenser (1 side resin, 1 side hardener)

Waterproof Yes

Adheres To Clean dry Surfaces

California Proposition 65 N/A

Minimum Temperature Rating 60.0

Maximum Temperature Rating 180.0

Mixing Method Depress plunger on syringe or squeeze out of tubes equal amounts of resin and hardener from tubes. Thoroughly mix resin and hardener on a clean discardable surface for at least one (1) minute (20 to 25 seconds in the case of the one minute epoxy) or until uniform in color

California Proposition 65 Required N

5 MINUTE GAP FILLING EPOXY .84 FL. OZ.

About this item

Substitute Products

Upgrade Products

Related Products

Recently Viewed Products